Firstly, the original motorbikes are usually equipped with exhaust lines that don’t match the motorcycle line. Specially on your BMW R 80 RT! In fact, they do not have the choice to reach the level of homologation tests to maintain their industry. Nevertheless, the original exhauts are heavier and less effective compared to the exhausts created by specialized brands. Furthermore, it is clear that the sound of your BMW R 80 RT is not flattering at all equipped with the original ones. Additionally, being able to hear yourself during the ride is a serious satisfaction. And safer as well, because we are clearly heard by the other motorists. Regardless if we enjoy tuning not at all, changing an exhaust system is very common and it will provide a little more originality to your BMW R 80 RT. Here, you will find our recommendations to swap it on your own.change-exhaust-BMW-R-80-RT

Steps to change the exhaust of your BMW R 80 RT

To change the exhaust system of your BMW R 80 RT, you basically need simple tools. This task will not need a large expertise in mechanics. First, just unscrew the screws on your exhaust system manifold and then on the manifold. After that you can certainly unscrew the exhaust screws and springs that are found on the motorbike frame and as well those on the middle pipe. Be aware to hold your BMW R 80 RT muffler while removing it. Secondly, take out the lambda sensor and the wires on the exhaust system. Only if your BMW R 80 RT is set up with it. The ideal approach is to go carefully and to be mindful that the lambda sensor or the wires aren’t hanged. To take out the lambda sensor just unscrew the 2 screws that are positionned on the cover of the lambda sensor. Then, it is easy to take out the complete exhaust.

Steps to install an exhaust system on your BMW R 80 RT

To set up the new exhaust system, simply repeat this operation in the opposite way. If only it is for a muffler, the middle pipe is required to be introduced in the BMW R 80 RT exhaust manifold. Set them in position without tightening up. Then, insert your new muffler in the middle pipe and then be sure that these elements are well axed. Following this, the srews need to be introduced and prefixed to the fixations of your BMW R 80 RT. Now, you need to attach the springs to the the provided eyelets. After that, you’re able to tighten the total exhaust system. Make certain to tighten the screws firmly but don’t overdo it. And not surprisingly, reconnect the sensor and wires. Be aware, several exhaust systems require a particular motor mapping, it will certainly avoid the engine coughing and a greater operation. For reprogramming the motor, it really is normal to go to a specialist. This will permit your new muffler or exhaust to fully express its efficiency. You are able to now hear the pure sound of your BMW R 80 RT!