In the beginning, the original motorbikes are commonly equipped with exhauts that don’t fit the motorcycle design. Specifically on your Harley-Davidson Dyna Street Bob! In fact, motorbike brands do not have the choice to reach the level of homologation checks to maintain their business. Nevertheless, the original exhauts are thicker and less effective than the exhausts developed by specialized brands. Furthermore, it is obvious that the sound of your Harley-Davidson Dyna Street Bob is surely not flattering at all equipped with the original exhaust system. Equally, becoming able to hear yourself during the trip is a real pleasure. And more secure as well, mainly because we are clearly heard by the various other motorists. Regardless if we enjoy tuning or not, changing an exhaust system is highly wide-spread and that will bring a little more novelty to your Harley-Davidson Dyna Street Bob. Here, you will discover our tips to change it on your own.change-exhaust-Harley-Davidson-Dyna-Street-Bob

Steps to change the exhaust of your Harley-Davidson Dyna Street Bob

To change the exhaust system of your Harley-Davidson Dyna Street Bob, you simply need basic tools. This operation doesn’t require a large knowledge in mechanics. First, just unscrew the screws of your exhaust system manifold and then on the manifold. Therefore you are able to unscrew the exhaust screws and springs that are on the motorbike frame and also those on the middle pipe. Be mindful to hold your Harley-Davidson Dyna Street Bob muffler while removing it. Second of all, remove the lambda sensor and the wires on the exhaust system. Only if your Harley-Davidson Dyna Street Bob is equipped with it. The ideal method is to go methodically and to be mindful that the sensor or the wires are not hanged. To remove the sensor just unscrew the 2 screws that are positionned on the black cover of the sensor. After that, you’re able to remove the complete exhaust system.

Steps to install an exhaust system on your Harley-Davidson Dyna Street Bob

To fit the new exhaust system, only replicate this operation in the opposite way. If only it is for a muffler, the middle pipe need to be introduced into the Harley-Davidson Dyna Street Bob manifold. Put them in position without being tightened up. After that, place your new muffler into the middle pipe and then be sure that these parts are actually well centered. After this, the exhauste screws must be inserted and fixed to the fixations of your Harley-Davidson Dyna Street Bob. Now, you need to connect the springs to the the adequate eyelets. Therefore, you’re able to tighten up the whole exhaust system. Make certain to tighten up the screws strongly nevertheless you should not overdo it. And not surprisingly, reunite the sensor and wires. Be careful, several exhausts require a specific motor mapping, it will avoid the engine coughing and a greater comfort of use. For mapping the motor, it is traditional to go to a specialist. This will allow your new muffler or exhaust system to completely demonstrate its effectiveness. You can actually right now hear the genuine sound of your Harley-Davidson Dyna Street Bob!