In the beginning, the original motorbikes are commonly equipped with exhaust lines that don’t match the motorcycle design. Especially on your Harley Davidson DYNA STREET BOB! In reality, motorcycle brands do not have the choice to reach the level of homologation checks to preserve their business. On the other hand, the original exhauts are thicker and less efficient compared to the exhausts built by specialized brands. Furthermore, it is clear that the sound of your Harley Davidson DYNA STREET BOB is surely not complementing at all equipped with the original exhaust system. Also, being able to hear our self within the the ride is a real pleasure. And more secure as well, because we are evidently noticed by the various other road users. No matter if we like tuning or not, swapping an exhaust is highly wide-spread and that will provide a bit more novelty to your Harley Davidson DYNA STREET BOB. In this article, you’re going to find our recommendations to change it on your own.
Steps to change the exhaust of your Harley Davidson DYNA STREET BOB
To change the exhaust of your Harley Davidson DYNA STREET BOB, you just require basic tools. This operation does not need a huge expertise in mechanics. First, simply unscrew the screws of your exhaust manifold and the manifold. After that you can easily unscrew the screws and springs that are found on the frame and as well all those on the intermediate pipe. Be careful to maintain your Harley Davidson DYNA STREET BOB exhaust muffler when removing it. Second of all, remove the lambda sensor and the wires on the exhaust system. Only if your Harley Davidson DYNA STREET BOB is set up with it. The ideal technique is to go methodically and to be mindful that the lambda sensor or the wires are not hanged. To remove the lambda sensor simply unscrew the 2 screws that are on the cover of the sensor. Then, you can remove the full exhaust.
Steps to install an exhaust system on your Harley Davidson DYNA STREET BOB
To fit the new exhaust, just repeat this procedure in the inverted way. If it is only a exhaust muffler, the intermediate pipe must be inserted into the Harley Davidson DYNA STREET BOB exhaust manifold. Set these parts in position without being tightened up. After that, place your new exhaust muffler into the intermediate pipe and ensure that these parts are actually well centered. After this, the srews need to be inserted and prefixed to the fixations of your Harley Davidson DYNA STREET BOB. Now, you have to attach the springs to the the adequate fixations. After that, you can actually tighten up the whole exhaust. Be sure to tighten up the screws firmly but don’t overdo it. And not surprisingly, reunite the lanbda sensor and wires. Be aware, several exhaust systems require a particular programmation, it will avoid the motor coughing and a better comfort of use. For reprogramming the engine, it really is traditional to go to a professional. This will allow your new muffler or exhaust to totally express its efficiency. You are able to right now listen to the pure sound of your Harley Davidson DYNA STREET BOB!