How to change the front and rear indicators of your BMW R100 GS

To begin with, the indicators are actually for us bikers, the guarantee of our basic safety and our visibility on the road. Nevertheless, the primary indicators are generally not at all embellishing the motorbike design. Especially on the BMW R100 GS! In truth, they are really unpleasant. For this reason, changing the turn indicator has become one of the primary steps in the changes of the bike. Simply to fit the general line. And above all, for originality. It is usually more pleasurable to not drive the same BMW R100 GS as anybody else. Despite the simple fact that this transformation is extremely simple and affordable, some aspects have to be considered. In particular, when changing turn signal lamps to LED indicators. It is right that the LED indicators are generally more beautiful and most importantly longer lasting due to their durability. Nevertheless, their set up is definitely not as basic as when exchanging standard indicators. Basically because the LED indicators won’t involve the same electric power to operate. We will explain to you the details of their installation in this posting.change-indicators-BMW-R100-GS

The right way to choose the turn signals for your BMW R100 GS

Primary, to choose the right indicators for your BMW R100 GS, it is right to say that we can discover everything and anything on the marketplace. And particularly with considerable value variations. For your BMW R100 GS, you will need to ask yourself the best questions to choose the perfect indicators. Start by knowing if your BMW R100 GS is currently equipped with standard turn signals or LED ones. Basically because if you want to modify your standard indicators to LED indicators on your BMW R100 GS, it will not require the precise same installation costs and methods. For the change to a LED system starting from a basic indicators installation you will find two different methods. The 1st one is to change the flash relay of your BMW R100 GS in order to deliver an adequate electric power for the new set up. The 2nd technique is to trick your indicators relay by setting up a resistor on each indicators. Globally , the 2nd approach is the least expensive for your BMW R100 GS. Concerning the 2nd approach, it’ll be explained in this tutorial. Additionally, the qualification of your BMW R100 GS’s turn indicators is important if you do not desire to pay a fine. For their intervals installation, it is a minimum space of 24 cm at the front side and 180 mm at the rear of your BMW R100 GS. And for the frequence of blinking, it is required to get around 90 fps with a difference of approximately 30 flashes. Given that you are cautioned, let’s move on to the technique of mounting the indicators on your BMW R100 GS.

Guide for changing the front and rear indicators on BMW R100 GS

In this article, we will explain detail by detail the best way to modify the indicators on your BMW R100 GS. This technique can be applied to both standard and LED indicators. We will identify at the appropriate time the variations between the installation of the standard indicators and LED indicators. The reason of this method is to provide you the right chronology to improve your BMW R100 GS regarding to the products you have selected. A very little reminder about the LED indicators, their consumption is reduced. So, if you are not currently equipped with LEDs on your BMW R100 GS, you will either have to modify your indicators relay or install resistors to each of the power supplies of the indicators.

  • First of all, open the saddle of your BMW R100 GS, and remove the negative port of the electric battery in order to prevent a short-circuit.
  • Then we begin with the front side, removing and disconnecting the existing indicators and we will install the new ones. In some instances, you need to take apart the fairing to adjust them better. Be mindful to keep every parts.
  • Then, simply join the new indicators to the existing cable connections on your BMW R100 GS, pay attention to follow the polarity.
  • At this stage, the front side is done! With regard to the back indicators of your BMW R100 GS, you will need to take apart your saddle and sometimes even remove your back fairing. It is very easy to accomplish with a basic tool set but be cautious of not dropping it. You will then have to employ the same technique as for the front side indicators. And of course, make the right installation for your BMW R100 GS turn indicator system. Then just reassemble and reconnect the electric battery before closing the seat of your BMW R100 GS.

The right way to install LED turn signals on your BMW R100 GS

  • Once your indicators are set up, it’s completed! Unless you have to install LED indicators and your turn indicator relay is not compatible, you will have to join power resistors for LED indicators. It is available on the marketplace some wires already mounted with resistors, that are much simpler to join. You are able to place them anywhere you desire on the power supply of the indicators, even just at the rear of the new indicators. Nevertheless make sure that it is situated in a ventilated position as they can warm up to 100 degrees Celsius.

To end, this modification is very simple and can be achieved in thirty short minutes if you possess all the components. As for the tool set, it is really very standard, so that a set of keys and hex key, as well a standard or electric clamp. For cable connections, it is possible to use diverse things like the electrician tape or heat-shrink sleeve but even Japanese pods or basic banana plugs. If you stick to the various suggestions correctly, you will be able to do the installation quickly. Hope your BMW R100 GS is a lot more flamboyant,have a very good trip !!