How to change the front and rear indicators of your BMW R1100 GS

In the beginning, the indicators are for us bikers, the assurance of our safety and our presence while riding. However, the primary indicators are generally not at all flattering the motorbike line. Specifically on the BMW R1100 GS! To be truthful, they are ugly. That’s why, updating the turn signal is now one of the first steps in the changes of the bike. Just to fit the style of the bike. Additionnaly, for authenticity. It is still more pleasurable to not ride the same BMW R1100 GS as his neighbor. Despite the simple fact that this transformation is very basic and inexpensive, several factors have to be considered. Particularly, when changing turn signal lamps to LED indicators. It is factual that the LED indicators are generally more good-looking and specifically more durable due to their long life. However, their installation is not as simple as when changing standard indicators. Basically considering that the LED indicators won’t require the same electric power to operate. We will describe to you the specs of their installment in this article.change-indicators-BMW-R1100-GS

Tips on how to select the turn signals for your BMW R1100 GS

First, to select the right indicators for your BMW R1100 GS, it is true that we can find a lot of bad stuffs on the marketplace. And especially with huge cost variations. To improve your BMW R1100 GS, you will have to ask yourself the best questions to select the perfect indicators. Begin by knowing if your BMW R1100 GS is previously equipped with standard turn signals or LED ones. Basically because if you wish to modify your flashing lights to LED indicators on your BMW R1100 GS, it will not need the precise same set up costs and techniques. For the swap to a LED turning system with a regular indicators installation you will have two diverse methods. The 1st approach is to change the signal relay of your BMW R1100 GS in order to deliver an satisfactory electric power for the new installation. The second approach is to trick your indicators relay by installing a resistor on every indicators. Generally, the 2nd approach is the least expensive for your BMW R1100 GS. Concerning the 2nd approach, it will be described in this article. Secondly, the qualification of your BMW R1100 GS’s turn signals is important in the event you don’t desire to pay out a fine. For their spacing set up, it is a minimum space of 24 cm at the front and 180 mm at the rear of your BMW R1100 GS. And for the frequence of blinking, it is required to get about 90 fps with a difference of approximately 30 blinks. Now that you are warned, let’s move on to the approach of mounting the indicators on your BMW R1100 GS.

Information for changing the front and rear indicators on BMW R1100 GS

Below, we will clarify detail by detail the best way to modify the indicators on your BMW R1100 GS. This process can be applied to both regular and LED indicators. We will identify at the appropriate time the distinctions between the set up of the ordinary indicators and LED indicators. The purpose of this process is to give you the correct chronology to modify your BMW R1100 GS regarding to the products you have selected. A little tip about the LED indicators, their consumption is lower. Consequently, if you aren’t already geared up with LEDs on your BMW R1100 GS, you will either have to adjust your indicators relay or set up resistors on each of the power wires of the indicators.

  • First, open the seat of your BMW R1100 GS, then disconnect the negative terminal of the electric battery in order to avoid a short-circuit.
  • After that we begin with the front, dismantling and unpluging the existing indicators and we will install the new ones. Sometimes, you will need to dismantle the fairing to adjust for the best. Be mindful to keep all the parts.
  • Then, just join the new indicators to the existing wires on your BMW R1100 GS, in taking care to respect the electrical polarity.
  • At this time, the front is done! With regard to the back indicators of your BMW R1100 GS, you need to disassemble your seat and sometimes even take apart your back fairing. It is fairly simplistic to accomplish with a simple tool set but be cautious of not dropping it. You will then have to employ the same technique as for the front indicators. And of course, make the correct installation for your BMW R1100 GS turn signal system. Then you just have to reassemble and reconnect the electric battery before closing the seat of your BMW R1100 GS.

Tips on how to set up LED turn signals on your BMW R1100 GS

  • Now that your indicators are set up, you are done! Except if you have to mount LED indicators and your turn signal relay is not compatible, you will need to join power resistors for LED indicators. It is available on the marketplace some resistive wires, that are much simpler to link up. You are able to set them wherever you desire on the power supply of the indicators, possibly just behind the new indicators. However ensure that it will be positioned in a ventilated position as they can heat up to 100 degrees Celsius.

To end, this operation is very easy and can be achieved in 30 mins if you possess all the parts. As for the tool, it is really very standard, so that a set of keys and hex key, and also a standard or electric clamp. For cable connections, it is possible to use several components like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you stick to the various suggestions correctly, you should be capable to do the modification quickly. Hope your BMW R1100 GS is much more flamboyant,have a good trip !!