How to change the front and rear indicators of your BMW R1100 RS

To begin with, the turn signals are for us bikers, the guarantee of our basic safety and our visibility while riding. However, the primary signals usually are not at all embellishing the motorcycle line. Specifically on the BMW R1100 RS! To be truthful, they are unattractive. For this reason, updating the turn indicator happens to be one of the first measures in the modification of the motorcycle. Just to match the design of the bike. And above all, for appearance. It is always more pleasurable to not ride the same BMW R1100 RS as anybody else. Despite the simple fact that this transformation is very ordinary and economical, several aspects have to be regarded. Specifically, when changing turn signal lamps to LED turn signals. It is factual that the LED signals are generally more beautiful and specifically more durable because of their durability. On the other hand, their setting up is not as basic as when changing standard turn signals. Simply considering that the LED turn signals don’t involve the same power to function. We will demonstrate to you the specifics of their installation in this article.change-indicators-BMW-R1100-RS

The right way to select the indicators for your BMW R1100 RS

First of all, to select the right signals for your BMW R1100 RS, it is true that we can discover a lot of bad stuffs on the marketplace. And particularly with huge cost variations. To improve your BMW R1100 RS, you will need to ask yourself the best concerns to select the perfect signals. Start by understanding if your BMW R1100 RS is previously outfitted with standard indicators or LED ones. Basically because if you want to modify your standard indicators to LED turn signals on your BMW R1100 RS, it does not require the precise same installation spending and methods. For the switch to a LED turning system starting from a regular indicators installation you will have 2 different techniques. The first one is to switch the signal relay of your BMW R1100 RS to be able to deliver an sufficient power for the new installation. The second technique is to deceive your flashing relay by installing a resistor on each turn signals. Generally, the 2nd technique is the most affordable for your BMW R1100 RS. Concerning the 2nd technique, it’ll be explained in this guide. Second of all, the certification of your BMW R1100 RS’s turn signals is significant in the event you do not want to pay a fine. For their intervals installation, it is a nominal space of 24 cm at the front and 18 cm at the rear of your BMW R1100 RS. And for their frequency of blinking, it is necessary to be around 90 fps with a difference of approximately 30 flashes. Given that you are notified, let’s apprehend the technique of installing the turn signals on your BMW R1100 RS.

Tutorial for changing the front and rear turn signals on BMW R1100 RS

Here, we will describe step-by-step the best way to modify the turn signals on your BMW R1100 RS. This technique is applicable to both regular and LED signals. We will indicate at the appropriate time the distinctions between the installation of the standard turn signals and LED signals. The aim of this technique is to give you the proper timeline to modify your BMW R1100 RS regarding to the products you have decided on. A very little reminder about the LED signals, their electrical consumption is lower. So, if you aren’t already geared up with LEDs on your BMW R1100 RS, you will either have to adjust your signals relay or install resistors on each of the power wires of the turn signals.

  • First, open up the seat of your BMW R1100 RS, then disconnect the negative port of the electric battery to be able to avoid a short-circuit.
  • Then we begin with the front, removing and unpluging the existing turn signals and we will mount the brand-new ones. In some cases, you will need to dismantle the fairing to adapt for the best. Be aware to keep all the parts.
  • Therefore, simply connect the new turn signals to the originals cable connections on your BMW R1100 RS, pay attention to follow the electrical polarity.
  • At this stage, the front is completed! With regard to the rear signals of your BMW R1100 RS, you need to take apart your seat and often even dismantle your rear end fairing. It is very easy to do with a basic tool set but be careful of not falling it. You could then have to use the same methodology as for the front turn signals. And naturally, get the proper fitting for your BMW R1100 RS turn indicator system. Therefore you just have to reassemble and reconnect the electric battery before closing the seat of your BMW R1100 RS.

The right way to install LED indicators on your BMW R1100 RS

  • Once your turn signals are placed, it’s completed! Unless you have to mount LED turn signals and your turn indicator relay is not adequate, you will have to connect power resistors for LED turn signals. It is available on the marketplace some wires already mounted with resistors, that are much easier to join. You are able to set them anywhere you want on the power supply of the turn signals, possibly just at the rear of the new turn signals. However make certain that it will be located in a ventilated location as they may heat up to 100 degrees Celsius.

To end, this manipulation is very simple and can be achieved in thirty mins if you have all the elements. As for the tool set, it is definitely very basic, so that a set of keys and hex key, as well a standard or electric clamp. For connections, it is possible to make use of different components like the electrician tape or heat-shrink sleeve but even Japanese pods or basic banana plugs. If you follow the various indications accurately, you should be able to do the installation quickly. Hope your BMW R1100 RS is much more flamboyant,have a very good trip !!