How to change the front and rear indicators of your Ducati Monster 1200

To start with, the turn signals are for us bikers, the assurance of our safety and our visibility on the road. However, the initial indicators aren’t at all embellishing the motorcycle design. Especially on the Ducati Monster 1200! In truth, they are simply unattractive. Therefore, changing the turn indicator has become one of the primary actions in the modification of the motorbike. Basically to fit the style of the bike. Additionnaly, for originality. It is always more pleasant to not drive the same Ducati Monster 1200 as his neighbor. Even though the simple fact that this transformation is very simple and inexpensive, some aspects have to be considered. Especially, when turning ordinary indicators to LED turn signals. It is true that the LED indicators are generally more beautiful and especially more durable due to their durability. On the other hand, their installation is definitely not as simple as when exchanging standard turn signals. Basically because the LED turn signals don’t require the same electric power to operate. We will demonstrate to you the specs of their set up in this article.change-indicators-Ducati-Monster-1200

The right way to choose the indicators for your Ducati Monster 1200

First of all, to find the right indicators for your Ducati Monster 1200, it is true that we can get a lot of bad stuffs on the marketplace. And especially with huge value variations. To improve your Ducati Monster 1200, you will need to ask yourself the best concerns to find the perfect indicators. Start by understanding if your Ducati Monster 1200 is previously equipped with standard indicators or LED ones. Just because if you want to change your standard indicators to LED turn signals on your Ducati Monster 1200, it does not need the same set up spending and techniques. For the switch to a LED system starting from a regular indicators installation you will find 2 diverse methods. The 1st technique is to switch the signal relay of your Ducati Monster 1200 in order to have an adequate electric power for the new installation. The second approach is to deceive your indicators relay by installing a resistor on each turn signals. Generally, the second technique is the most affordable for your Ducati Monster 1200. Concerning the second technique, it will be revealed in this guide. Additionally, the qualification of your Ducati Monster 1200’s turn indicators is important if you do not want to pay out a fine. For their intervals set up, it is a nominal space of 24 cm at the front and 180 mm at the rear side of your Ducati Monster 1200. And then for their frequency of blinking, it is necessary to get around 90 fps with a margin of approximately 30 flashes. Given that you are warned, let’s move on to the approach of installing the turn signals on your Ducati Monster 1200.

Information for changing the front and rear turn signals on Ducati Monster 1200

Here, we will explain step by step how to change the turn signals on your Ducati Monster 1200. This technique can be applied to both classic and LED indicators. We will identify at the appropriate time the variations between the set up of the ordinary turn signals and LED indicators. The reason of this method is to give you the correct timeline to improve your Ducati Monster 1200 relating to the equipment you have selected. A little reminder about the LED indicators, their electrical consumption is lower. So, if you’re not currently equipped with LEDs on your Ducati Monster 1200, you will either have to modify your indicators relay or set up resistors on each of the power wires of the turn signals.

  • First of all, open the saddle of your Ducati Monster 1200, and disconnect the negative terminal of the electric battery in order to avoid a short-circuit.
  • Then we begin with the front, dismantling and disconnecting the existing turn signals and we will set up the new ones. Sometimes, you have to dismantle the fairing to adapt them better. Be aware to keep every parts.
  • Therefore, just join the new turn signals to the existing wires on your Ducati Monster 1200, pay attention to follow the electrical polarity.
  • At this point, the front is completed! With regard to the back indicators of your Ducati Monster 1200, you have to disassemble your saddle and often even take apart your back fairing. It is fairly simplistic to accomplish with a standard tool set but be careful of not dropping it. You may then have to employ the same technique as for the front turn signals. And naturally, make the correct installation for your Ducati Monster 1200 turn indicator system. Therefore just reassemble and reconnect the electric battery before closing the seat of your Ducati Monster 1200.

The right way to set up LED indicators on your Ducati Monster 1200

  • Once your turn signals are set up, it’s completed! Unless you have to install LED turn signals and your turn indicator relay is not suitable, you will need to join power resistors for LED turn signals. It exists on the marketplace some resistive wires, that are much simpler to join. You can place them wherever you want on the power supply of the turn signals, possibly just behind the new turn signals. However make sure that it will be positioned in a aired position as they may warm up to 100 degrees Celsius.

To finish, this operation is very easy and can be done in thirty short minutes if you have all the components. As for the tool set, it is definitely very standard, so that a set of keys and hex key, and also a conventional or electric clamp. For connections, it is possible to make use of diverse components like the electrician tape or heat-shrink sleeve but even Japanese pods or simple banana plugs. If you follow the several indications accurately, you should be capable to do the installation fairly quickly. Hope your Ducati Monster 1200 is much more elaborate,have a good trip !!