How to change the front and rear indicators of your Honda CB X-11

In the beginning, the turn signals are for us bikers, the guarantors of our basic safety and our visibility on the road. However, the initial indicators are generally not at all embellishing the motorcycle line. Specifically on the Honda CB X-11! In truth, they are simply unattractive. For this reason, changing the turn indicator happens to be one of the first actions in the modification of the bike. Simply to match the general line. And above all, for authenticity. It is still more pleasant to not ride the same Honda CB X-11 as his neighbor. Even though the simple fact that this modification is extremely ordinary and inexpensive, some factors need to be regarded. Especially, when changing turn signal lamps to LED turn signals. It is true that the LED indicators are generally more elegant and especially longer lasting because of their endurance. On the other hand, their set up is not as simple as when exchanging standard turn signals. Simply considering that the LED turn signals do not require the same power to run. We will describe to you the specifics of their set up in this article.change-indicators-Honda-CB-X-11

Tips on how to choose the indicators for your Honda CB X-11

First, to find the right indicators for your Honda CB X-11, it is true that we can get a lot of bad stuffs on the marketplace. And especially with huge selling price variations. For your Honda CB X-11, you will need to question yourself the right concerns to find the perfect indicators. Begin by knowing if your Honda CB X-11 is previously outfitted with standard indicators or LED ones. Basically because if you want to change your standard indicators to LED turn signals on your Honda CB X-11, it does not require the same installation spending and techniques. For the swap to a LED turning system starting from a ordinary indicators installation you will have 2 different methods. The first approach is to switch the flash relay of your Honda CB X-11 to be able to deliver an satisfactory power for the new unit installation. The second technique is to deceive your indicators relay by installing a resistor on every turn signals. Generally, the second approach is the most affordable for your Honda CB X-11. As for the second approach, it will be revealed in this guide. Secondly, the certification of your Honda CB X-11’s turn signals is significant in the event you don’t want to pay a fine. For their spacing installation, it is a nominal space of 240 mm at the front side and 180 mm at the rear side of your Honda CB X-11. And then for their frequency of blinking, it is required to be about 90 fps with a difference of approximately 30 flashes. Now that you are informed, let’s move on to the technique of mounting the turn signals on your Honda CB X-11.

Information for swapping the front and rear turn signals on Honda CB X-11

Here, we will clarify step by step the best way to change the turn signals on your Honda CB X-11. This process can be applied to both regular and LED indicators. We will indicate at the appropriate time the differences between the installation of the regular turn signals and LED indicators. The purpose of this process is to provide you the proper timeline to modify your Honda CB X-11 regarding to the products you have chosen. A tiny tip about the LED indicators, their electrical consumption is reduced. Consequently, if you’re not already geared up with LEDs on your Honda CB X-11, you will either need to adapt your indicators relay or set up resistors on each of the power wires of the turn signals.

  • Initially, open the seat of your Honda CB X-11, and remove the – terminal of the battery to be able to avoid a short-circuit.
  • After that we start with the front side, dismantling and unpluging the existing turn signals and we will set up the brand-new ones. In some cases, you have to dismantle the fairing to adjust them better. Be mindful to keep every parts.
  • Therefore, just connect the new turn signals to the originals cable connections on your Honda CB X-11, pay attention to respect the electrical polarity.
  • At this time, the front side is completed! Intended for the back indicators of your Honda CB X-11, you will need to take apart your seat and often even take apart your back fairing. It is very easy to do with a standard tool set but be cautious of not falling it. You could then need to employ the same technique as for the front side turn signals. And of course, get the proper fitting for your Honda CB X-11 turn indicator system. Therefore you just have to reassemble and reunite the battery before closing the seat of your Honda CB X-11.

Tips on how to set up LED indicators on your Honda CB X-11

  • Once your turn signals are set up, you are done! Unless you have to set up LED turn signals and your turn indicator relay is not compatible, you will have to connect power resistors for LED turn signals. It exists on the marketplace some wires already mounted with resistors, that happen to be much easier to join. You are able to place them anywhere you want on the power supply of the turn signals, possibly just behind the new turn signals. However make sure that it is situated in a aired location as they can warm up to 100 degrees Celsius.

To finish, this manipulation is very easy and can be done in thirty minutes if you have all the components. As for the tool set, it is really very basic, so that a set of keys and hex key, as well a standard or electric clamp. For cable connections, it is conceivable to make use of diverse things like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you follow the various suggestions correctly, you will be capable to do the installation quickly. Hope your Honda CB X-11 is much more showy,have a very good ride !!