How to change the front and rear indicators of your Piaggio X10 350

To begin with, the turn signals are for us motorbikers, the guarantors of our security and our presence while riding. Nevertheless, the primary indicators are not at all flattering the motorbike line. Especially on the Piaggio X10 350! To be honest, they are really unattractive. That’s why, changing the turn indicator happens to be one of the first actions in the changes of the motorbike. Basically to match the general line. And above all, for originality. It is always more enjoyable to not drive the equal Piaggio X10 350 as anybody else. Despite the simple fact that this modification is extremely basic and inexpensive, several aspects have to be regarded. Specifically, when changing ordinary indicators to LED turn signals. It is true that the LED indicators are generally more elegant and specifically longer lasting due to their extended life. However, their setting up is definitely not as simple as when changing standard turn signals. Basically because the LED turn signals don’t need the same power to operate. We will explain to you the specifics of their set up in this article.change-indicators-Piaggio-X10 350

How to choose the turn signals for your Piaggio X10 350

Primary, to find the right indicators for your Piaggio X10 350, it is right to say that we can find everything and anything on the market. And particularly with considerable selling price variations. To improve your Piaggio X10 350, you will have to ask yourself the best concerns to find them. Start by knowing if your Piaggio X10 350 is already outfitted with standard turn signals or LED ones. Just because if you desire to modify your flashing lights to LED turn signals on your Piaggio X10 350, it does not require the precise same set up spending and techniques. For the switch to a LED system with a regular indicators installation you will find 2 diverse tactics. The 1st approach is to change the flash relay of your Piaggio X10 350 in order to have an satisfactory power for the new installation. The second approach is to trick your flashing relay by installing a resistor on each turn signals. Globally , the second approach is the most economical for your Piaggio X10 350. Concerning the second approach, it will be revealed in this tutorial. Additionally, the qualification of your Piaggio X10 350’s turn indicators is crucial in the event you do not want to pay a fine. For their intervals set up, it is a minimum space of 240 mm at the front side and 180 mm at the rear of your Piaggio X10 350. And then for the frequence of flashing, it is required to get around 90 fps with a difference of more or less 30 flashes. Given that you are informed, let’s move on to the approach of mounting the turn signals on your Piaggio X10 350.

Information for changing the front and rear turn signals on Piaggio X10 350

In this section, we will demonstrate step-by-step the best way to modify the turn signals on your Piaggio X10 350. This process can be applied to both standard and LED indicators. We will indicate at the appropriate time the distinctions between the set up of the standard turn signals and LED indicators. The aim of this process is to provide you the proper timeline to modify your Piaggio X10 350 according to the equipment you have decided on. A very little reminder relating to the LED indicators, their consumption is reduced. So, if you are not already equipped with LEDs on your Piaggio X10 350, you will either have to adjust your indicators relay or install resistors on each of the power wires of the turn signals.

  • First of all, open up the saddle of your Piaggio X10 350, and then remove the negative port of the electric battery in order to avoid a short-circuit.
  • After that we begin with the front side, taking out and disconnecting the existing turn signals and we will set up the new ones. Occasionally, you have to take apart the fairing to adjust them better. Be mindful to keep all the parts.
  • Then, simply join the new turn signals to the originals wires on your Piaggio X10 350, in taking care to respect the polarity.
  • At this stage, the front side is completed! With regard to the back indicators of your Piaggio X10 350, you need to disassemble your saddle and often even dismantle your rear fairing. It is fairly simplistic to accomplish with a standard tool set but be careful of not falling it. You may then have to employ the same technique as for the front side turn signals. And definitely, get the proper installation for your Piaggio X10 350 turn indicator system. Then you just have to reassemble and reunite the electric battery before closing the seat of your Piaggio X10 350.

How to install LED turn signals on your Piaggio X10 350

  • Once your turn signals are placed, you are done! Except if you have to set up LED turn signals and your turn indicator relay is not suitable, you will have to join power resistors for LED turn signals. It is available on the market some wires already mounted with resistors, that happen to be much simpler to join. You can set them wherever you want on the power supply of the turn signals, possibly just behind the new turn signals. Nevertheless ensure that it is placed in a ventilated position as they can heat up to 100 degrees Celsius.

To finish, this modification is very simple and can be achieved in thirty minutes if you possess all the parts. As for the tool, it is really very standard, so that a set of keys and hex key, and also a regular or electric clamp. For connections, it is conceivable to use different components like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you follow the several indications correctly, you should be capable to do the modification fairly quickly. Hope your Piaggio X10 350 is a lot more elaborate,have a very good trip !!