How to change the front and rear indicators of your Piaggo X Evo 125 

To start with, the indicators are actually for us motorbikers, the guarantors of our safety and our presence while riding. Nevertheless, the original signals are generally not at all flattering the motorbike line. Specifically on the Piaggo X Evo 125 ! To be honest, they are unpleasant. Therefore, updating the turn indicator is now one of the first steps in the modification of the bike. Simply to match the general line. And above all, for authenticity. It is usually more pleasant to not drive the equal Piaggo X Evo 125  as anybody else. Despite the fact that this change is extremely basic and inexpensive, several factors need to be considered. Especially, when turning ordinary indicators to LED indicators. It is right that the LED signals are generally more beautiful and especially longer lasting because of their extended life. However, their set up is not as simple as when changing standard indicators. Basically considering that the LED indicators do not require the same power to function. We will describe to you the specifics of their set up in this posting.change-indicators-Piaggo-X-Evo-125 

The right way to select the indicators for your Piaggo X Evo 125 

Primary, to choose the right signals for your Piaggo X Evo 125 , it is right to say that we can find everything and anything on the marketplace. And particularly with huge cost variations. To improve your Piaggo X Evo 125 , you will have to question yourself the best questions to choose them. Start by understanding if your Piaggo X Evo 125  is previously equipped with standard indicators or LED indicators. Basically because if you wish to change your standard indicators to LED indicators on your Piaggo X Evo 125 , it does not require the precise same set up costs and methods. For the switch to a LED turning system with a ordinary indicators installation you will have 2 different tactics. The first one is to switch the flash relay of your Piaggo X Evo 125  to be able to have an adequate power for the new set up. The 2nd technique is to trick your flashing relay by setting up a resistor on every indicators. Globally , the 2nd technique is the most economical for your Piaggo X Evo 125 . As for the 2nd technique, it’ll be described in this guide. Second of all, the certification of your Piaggo X Evo 125 ‘s turn signals is essential if you don’t want to pay out a fine. For their spacing set up, it is a nominal space of 240 mm at the front and 18 cm at the rear of your Piaggo X Evo 125 . And for their frequency of flashing, it is important to be around 90 fps with a difference of approximately 30 blinks. Now that you are cautioned, let’s move on to the technique of mounting the indicators on your Piaggo X Evo 125 .

Training for changing the front and rear indicators on Piaggo X Evo 125 

In this section, we will explain step-by-step the best way to change the indicators on your Piaggo X Evo 125 . This approach is applicable to both conventional and LED signals. We will indicate at the right time the differences between the set up of the regular indicators and LED signals. The aim of this technique is to provide you the proper chronology to modify your Piaggo X Evo 125  according to the products you have decided on. A little tip about the LED signals, their electric consumption is lower. Thus, if you are not already equipped with LEDs on your Piaggo X Evo 125 , you will either need to modify your signals relay or set up resistors on each of the power supplies of the indicators.

  • First of all, open up the saddle of your Piaggo X Evo 125 , then disconnect the – port of the battery to be able to avoid a short-circuit.
  • Then we begin with the front, removing and unpluging the existing indicators and we will install the new ones. In some instances, you need to take apart the fairing to adjust for the best. Be aware to keep every parts.
  • Therefore, simply connect the new indicators to the originals wires on your Piaggo X Evo 125 , pay attention to follow the polarity.
  • At this stage, the front is done! Intended for the rear signals of your Piaggo X Evo 125 , you have to take apart your saddle and sometimes even dismantle your back fairing. It is very simplistic to do with a standard tool set but be careful of not dropping it. You will then need to employ the same methodology as for the front indicators. And of course, make the proper installation for your Piaggo X Evo 125  turn indicator system. Therefore just reassemble and reunite the battery before closing the seat of your Piaggo X Evo 125 .

The right way to set up LED indicators on your Piaggo X Evo 125 

  • Once your indicators are placed, it’s completed! Except if you have to mount LED indicators and your turn indicator relay is not suitable, you will have to connect power resistors for LED indicators. It is available on the marketplace some resistive wires, that are much simpler to join. You can place them wherever you want on the power supply of the indicators, even just behind the new indicators. Nevertheless ensure that it is placed in a ventilated position as they can warm up to 100 degrees Celsius.

To finish, this manipulation is very easy and can be performed in thirty mins if you possess all the components. As for the tool set, it is really very basic, so that a set of keys and hex key, as well a standard or electric clamp. For cable connections, it is possible to make use of different things like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you follow the several indications correctly, you will be able to do the installation quickly. Hope your Piaggo X Evo 125  is a lot more flamboyant,have a good trip !!