How to change the front and rear indicators of your Suzuki Bandit

To begin with, the turn signals are for us bikers, the guarantee of our security and our visibility on the road. Nevertheless, the primary signals usually are not at all embellishing the motorbike design. Specifically on the Suzuki Bandit! To be honest, they are really unattractive. That’s why, changing the turn indicator is becoming one of the primary measures in the modification of the bike. Simply to match the general line. Additionnaly, for appearance. It is still more pleasant to not drive the equal Suzuki Bandit as anybody else. Despite the simple fact that this modification is extremely simple and affordable, several aspects need to be regarded. In particular, when turning ordinary indicators to LED turn signals. It is true that the LED signals are generally more good-looking and most importantly longer lasting due to their long life. Nevertheless, their set up is definitely not as simple as when exchanging standard turn signals. Simply because the LED turn signals do not need the same electric power to run. We will demonstrate to you the specifics of their set up in this posting.change-indicators-Suzuki-Bandit

How to select the indicators for your Suzuki Bandit

First, to find the right signals for your Suzuki Bandit, it is right to say that we can find a lot of bad stuffs on the market. And especially with considerable price differences. For your Suzuki Bandit, you will need to ask yourself the best concerns to find them. Begin by knowing if your Suzuki Bandit is currently equipped with standard indicators or LED indicators. Simply because if you wish to modify your standard indicators to LED turn signals on your Suzuki Bandit, it does not need the precise same set up spending and methods. For the change to a LED turning system starting from a basic installation you will have 2 different methods. The first one is to change the flash relay of your Suzuki Bandit to be able to have an sufficient electric power for the new unit installation. The 2nd approach is to trick your indicators relay by setting up a resistor on every turn signals. Generally, the second approach is the most economical for your Suzuki Bandit. Concerning the second approach, it will be explained in this guide. Second of all, the certification of your Suzuki Bandit’s turn indicators is essential in the event you do not want to pay out a fine. For their spacing set up, it is a nominal space of 240 mm at the front side and 180 mm at the rear side of your Suzuki Bandit. And then for the frequence of blinking, it is necessary to be about 90 fps with a difference of approximately 30 blinks. Given that you are notified, let’s move on to the approach of installing the turn signals on your Suzuki Bandit.

Training for swapping the front and rear turn signals on Suzuki Bandit

Here, we will clarify step-by-step how to modify the turn signals on your Suzuki Bandit. This approach is applicable to both standard and LED signals. We will specify at the appropriate time the distinctions between the set up of the standard turn signals and LED signals. The purpose of this method is to give you the right chronology to modify your Suzuki Bandit regarding to the equipment you have chosen. A little reminder relating to the LED signals, their consumption is lower. Thus, if you aren’t already geared up with LEDs on your Suzuki Bandit, you will either need to adapt your signals relay or set up resistors to each of the power supplies of the turn signals.

  • First of all, open the saddle of your Suzuki Bandit, and then remove the – port of the electric battery to be able to prevent a bypass.
  • After that we start with the front side, removing and disconnecting the existing turn signals and we will mount the new ones. In some cases, you will need to dismantle the fairing to adjust for the best. Take care to keep every parts.
  • Therefore, just connect the new turn signals to the originals wires on your Suzuki Bandit, pay attention to respect the electrical polarity.
  • At this time, the front side is completed! With regard to the back signals of your Suzuki Bandit, you need to disassemble your saddle and often even remove your back fairing. It is very simplistic to do with a standard tool set but be cautious of not falling it. You may then need to employ the same methodology as for the front side turn signals. And naturally, get the right fitting for your Suzuki Bandit turn indicator system. Therefore just reassemble and reconnect the electric battery before closing the seat of your Suzuki Bandit.

How to set up LED indicators on your Suzuki Bandit

  • Once your turn signals are set up, you are done! Unless you have to set up LED turn signals and your turn indicator relay is not suitable, you will need to connect power resistors for LED turn signals. It exists on the market some resistive wires, that happen to be much simpler to link up. You are able to place them wherever you want on the power supply of the turn signals, even just behind the new turn signals. Nevertheless ensure that it is situated in a aired location as they may warm up to 100 degrees Celsius.

To end, this manipulation is very easy and can be done in thirty mins if you possess all the parts. As for the tool set, it is definitely very standard, so that a set of keys and hex key, as well a standard or electric clamp. For connections, it is possible to make use of several components like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you stick to the several indications properly, you will be capable to do the modification fairly quickly. Hope your Suzuki Bandit is much more elaborate,have a good trip !!