How to change the front and rear indicators of your Suzuki Burgman 650

To begin with, the turn signals are actually for us bikers, the guarantee of our security and our visibility on the road. Nevertheless, the original signals aren’t at all flattering the motorbike line. Especially on the Suzuki Burgman 650! To be truthful, they are simply ugly. That’s why, changing the turn indicator is now one of the first actions in the modification of the motorcycle. Just to match the design of the bike. And above all, for authenticity. It is still more enjoyable to not ride the same Suzuki Burgman 650 as anybody else. Despite the fact that this modification is very simple and economical, several factors need to be regarded. Particularly, when changing turn signal lamps to LED turn signals. It is true that the LED signals are generally more good-looking and especially longer lasting because of their endurance. Nevertheless, their installation is definitely not as simple as when exchanging standard turn signals. Basically because the LED turn signals don’t require the same electric power to function. We will describe to you the specs of their installment in this article.change-indicators-Suzuki-Burgman-650

How to select the turn signals for your Suzuki Burgman 650

First, to choose the right signals for your Suzuki Burgman 650, it is true that we can get a lot of bad stuffs on the marketplace. And especially with considerable value differences. For your Suzuki Burgman 650, you will need to ask yourself the best concerns to choose them. Start by knowing if your Suzuki Burgman 650 is previously outfitted with standard turn signals or LED ones. Basically because if you want to modify your standard indicators to LED turn signals on your Suzuki Burgman 650, it will not require the same set up spending and techniques. For the switch to a LED system with a standard installation you will have two diverse methods. The 1st one is to switch the signal relay of your Suzuki Burgman 650 in order to have an satisfactory electric power for the new installation. The second method is to trick your flashing relay by installing a resistor on each turn signals. Globally , the second approach is the least expensive for your Suzuki Burgman 650. As for the second approach, it’ll be explained in this guide. Additionally, the qualification of your Suzuki Burgman 650’s turn indicators is crucial if you don’t want to pay a fine. For their intervals set up, it is a minimum gap of 24 cm at the front and 180 mm at the rear side of your Suzuki Burgman 650. And for their frequency of blinking, it is important to be around 90 fps with a difference of more or less 30 blinks. Now that you are notified, let’s move on to the method of installing the turn signals on your Suzuki Burgman 650.

Tutorial for swapping the front and rear turn signals on Suzuki Burgman 650

In this section, we will describe detail by detail how to modify the turn signals on your Suzuki Burgman 650. This process is applicable to both classic and LED signals. We will specify at the right time the distinctions between the set up of the standard turn signals and LED signals. The reason of this method is to give you the correct timeline to improve your Suzuki Burgman 650 regarding to the products you have selected. A tiny tip relating to the LED signals, their consumption is reduced. So, if you are not already geared up with LEDs on your Suzuki Burgman 650, you will either need to adjust your signals relay or set up resistors to each of the power supplies of the turn signals.

  • Initially, open the seat of your Suzuki Burgman 650, and remove the negative terminal of the electric battery in order to avoid a bypass.
  • Then we begin with the front, taking out and disconnecting the installed turn signals and we will install the new ones. In some cases, you will need to take apart the fairing to adapt them better. Take care to keep all the parts.
  • Then, just connect the new turn signals to the existing wires on your Suzuki Burgman 650, pay attention to follow the electrical polarity.
  • At this stage, the front is done! With regard to the back signals of your Suzuki Burgman 650, you will need to disassemble your seat and often even remove your back fairing. It is very easy to do with a standard tool set but be careful of not falling it. You may then need to use the same technique as for the front turn signals. And of course, make the correct installation for your Suzuki Burgman 650 turn indicator system. Then you just have to reassemble and reunite the electric battery before closing the seat of your Suzuki Burgman 650.

How to set up LED turn signals on your Suzuki Burgman 650

  • Once your turn signals are set up, you are done! Except if you have to mount LED turn signals and your turn indicator relay is not suitable, you will need to connect power resistors for LED turn signals. It is available on the marketplace some wires already mounted with resistors, that are much easier to connect. You are able to set them wherever you want on the power supply of the turn signals, even just at the rear of the new turn signals. Nevertheless make certain that it will be positioned in a ventilated position as they may heat up to 100 degrees Celsius.

To finish, this modification is very easy and can be achieved in thirty minutes if you possess all the parts. As for the tool set, it is definitely very basic, so that a set of keys and hex key, and also a standard or electric clamp. For connections, it is possible to make use of diverse things like the electrician tape or heat-shrink sleeve but also Japanese pods or simple banana plugs. If you stick to the various indications properly, you will be capable to do the installation quickly. Hope your Suzuki Burgman 650 is much more showy,have a very good trip !!