How to change the front and rear indicators of your Suzuki VStrom 1000 

In the beginning, the indicators are for us bikers, the assurance of our security and our visibility on the road. However, the initial signals are not at all flattering the motorcycle design. Especially on the Suzuki VStrom 1000 ! To tell the truth, they are ugly. For this reason, changing the turn indicator is now one of the first actions in the modification of the bike. Just to match the general line. And above all, for originality. It is still more enjoyable to not drive the same Suzuki VStrom 1000  as his neighbor. Despite the simple fact that this transformation is extremely simple and economical, several aspects need to be considered. Particularly, when changing turn signal lamps to LED indicators. It is factual that the LED signals are ordinary more good-looking and especially more durable due to their endurance. Nevertheless, their set up is definitely not as simple as when exchanging standard indicators. Basically considering that the LED indicators don’t need the same power to operate. We will describe to you the specifics of their set up in this posting.change-indicators-Suzuki-VStrom-1000 

The right way to choose the turn signals for your Suzuki VStrom 1000 

First of all, to find the right signals for your Suzuki VStrom 1000 , it is true that we can get everything and anything on the market. And especially with huge price variations. To improve your Suzuki VStrom 1000 , you will need to ask yourself the right questions to find the perfect signals. Begin by knowing if your Suzuki VStrom 1000  is previously equipped with standard turn signals or LED ones. Just because if you wish to change your standard indicators to LED indicators on your Suzuki VStrom 1000 , it does not need the precise same installation spending and techniques. For the switch to a LED system with a regular indicators installation you will have 2 diverse methods. The first one is to switch the signal relay of your Suzuki VStrom 1000  in order to have an satisfactory power for the new installation. The second technique is to deceive your indicators relay by installing a resistor on each indicators. Globally , the 2nd approach is the least expensive for your Suzuki VStrom 1000 . As for the 2nd approach, it’ll be explained in this tutorial. Secondly, the certification of your Suzuki VStrom 1000 ‘s turn indicators is significant if you don’t want to pay a fine. For their intervals installation, it is a nominal gap of 24 cm at the front and 18 cm at the rear of your Suzuki VStrom 1000 . And for their frequency of flashing, it is required to be about 90 fps with a margin of more or less 30 blinks. Now that you are cautioned, let’s apprehend the technique of installing the indicators on your Suzuki VStrom 1000 .

Tutorial for changing the front and rear indicators on Suzuki VStrom 1000 

Below, we will explain step by step the best way to change the indicators on your Suzuki VStrom 1000 . This technique is applicable to both standard and LED signals. We will specify at the right time the distinctions between the installation of the standard indicators and LED signals. The reason of this method is to give you the right chronology to modify your Suzuki VStrom 1000  relating to the products you have selected. A very little tip about the LED signals, their electrical consumption is lower. So, if you aren’t already geared up with LEDs on your Suzuki VStrom 1000 , you will either need to adapt your signals relay or install resistors on each of the power wires of the indicators.

  • First, open the seat of your Suzuki VStrom 1000 , and disconnect the negative terminal of the electric battery in order to avoid a short-circuit.
  • After that we start with the front, taking out and disconnecting the existing indicators and we will mount the new ones. In some cases, you have to take apart the fairing to adapt for the best. Be mindful to keep every parts.
  • Then, just join the new indicators to the originals cable connections on your Suzuki VStrom 1000 , pay attention to respect the polarity.
  • At this point, the front is done! Intended for the back signals of your Suzuki VStrom 1000 , you have to take apart your seat and often even remove your rear end fairing. It is fairly simplistic to accomplish with a simple tool set but be cautious of not dropping it. You will then need to employ the same technique as for the front indicators. And definitely, get the right fitting for your Suzuki VStrom 1000  turn indicator system. Then just reassemble and reunite the electric battery before closing the seat of your Suzuki VStrom 1000 .

The right way to install LED turn signals on your Suzuki VStrom 1000 

  • Once your indicators are set up, it’s completed! Except if you have to mount LED indicators and your turn indicator relay is not suitable, you will need to join power resistors for LED indicators. It exists on the market some resistive wires, that are much simpler to join. You are able to set them anywhere you want on the power supply of the indicators, even just behind the new indicators. However make sure that it is placed in a aired location as they can heat up to 100 degrees Celsius.

To finish, this modification is very simple and can be achieved in 30 minutes if you possess all the parts. As for the tool, it is definitely very standard, so that a set of keys and hex key, and also a conventional or electric clamp. For connections, it is conceivable to use different components like the electrician tape or heat-shrink sleeve but even Japanese pods or simple banana plugs. If you stick to the several indications correctly, you will be able to do the modification fairly quickly. Hope your Suzuki VStrom 1000  is a lot more flamboyant,have a good ride !!