Primary, recharging or keeping the battery charge of its Piaggo X Evo 125  is normally unproblematic to do for everyone. Nevertheless, you need to already know the best way to remove and reconnect your motorcycle battery correctly. In most cases, the battery of your Piaggo X Evo 125  is under the seat. Thus you could to open your motorcycle saddle first to intervene. You must have a motorcycle battery charger and a screwdriver to disconnect the battery for the charge.charge-battery-Piaggo-X-Evo-125 

The right way to charge the battery of its Piaggo X Evo 125 ?

First of all, a large amount of motorcycle electric batteries available on the marketplace are actually maintenance free. This means that there is no need to put in acid back again as soon the electric batteries have been initiated. As for the tools, you easily will need to have a screwdriver and have opened the saddle of its Piaggo X Evo 125  to gain the access to the battery. The battery is now disconnectable from the Piaggo X Evo 125  by the way of the screwdriver. The procedure is to disconnect the negative terminal (the black wire) and after that, disconnect the positive terminal (symbolized by the red wire). Once this step is done, you are ready to remove your Piaggo X Evo 125  battery, still be aware to avoid any contacts between the two battery terminals at the same time, in consequences, it can be the accidental electrocution. Then, take on your motorcycle battery charger that you need to connect on the battery terminals. And connect it on your battery by first connecting the red wire (the red charger terminal) to the positive battery terminal and then the black terminal of the charger to the negative terminal of your battery. And here is your battery is charging. Soon after the recharging period, you can reconnect the battery on the motorcycle electronical system, taking good care of preventing any contacts between the two battery terminals. To replug, join the red wire to the Positive side of the battery on your Piaggo X Evo 125 . Then, the dark wire to the negative terminal. Now your Piaggo X Evo 125  should certainly start without a difficulty!

How to maintain the battery charge of its Piaggo X Evo 125 ?

Relating to keeping the recharge of your Piaggo X Evo 125  battery, it is less difficult, you require to have a battery charger, that have got an charge keeper function. In that case you will need to open your seat to gain access to the battery of your Piaggo X Evo 125 . To make it, join the positive terminal with the red charger clamp and the negative terminal with the dark charger clamp. We simply need to connect the charger to the electrical source and it is completed!! It is very important to maintain the charge of the Piaggo X Evo 125  battery especially when the motorcycle is not ridden for a time, for example during the winter. This keeps your Piaggo X Evo 125  battery in better condition and for long!!