How to connect and disconnect the battery on its Harley Davidson BAD BOY?

Initially, intervening on the electric battery of its Harley Davidson BAD BOY is frequently regarded as a simple maintenance. However, you have to follow a methodology to be able to not being electrocuted or even damage the electrical circuits of your Harley Davidson BAD BOY. In the first place, it is important to remember the terminals and their action. The positive battery terminal, noticed by the reddish wire on the common motorbike electric battery, is the side that sends the electricity into the electrical circuits of your Harley Davidson BAD BOY. On the other hand, the – battery terminal is regarded as the ground, that is connected on the motorbike frame and permits to close the circuit. That is why, when working on this part, you have to take in consideration the features of the motorbike electric battery terminals to avoid any problem.connect-battery-Harley-Davidson-BAD-BOY

The best ways to disconnect the electric battery from its Harley Davidson BAD BOY?

To start with, when unpluging the electric battery from your Harley Davidson BAD BOY, always take out the – battery terminal initially. To get this done, basically use a electric screwdriver and unscrew the screws on the electric battery. This terminal can be identified by the dark wire (or blue sometimes). Beginning with the – clamp assists to protect the motorcycle electrical circuits. Next, simply unscrew the positive clamp, still with the screwdriver. The positive side is always observable by its reddish colored wire. Be aware that there is absolutely no contacts between the 2 terminals, with the tools or your hands. Otherwise it is the electrocution assured with a terrible pain !!!

Tips on how to connect the battery of its Harley Davidson BAD BOY?

According to this task, it is very simple, you should connect the positive terminal of the electric battery (symbolized by a +) to the reddish motorcycle Wire. Ensure that your Harley Davidson BAD BOY electric battery is charged, otherwise check out at our article on how to charge a motorbike battery. Then connect the – clamp of your electric battery with the dark wire. Use a screwdriver. Ensure that the electric battery lugs are neat, for instance with no corrosion and rust, because it can slow down the electric intensity. Generally, a simple metallic brush will permit to remove any impurities. Be aware to not contact the 2 electric battery terminals during your task, otherwise it will be painful !