How to connect and disconnect the battery on its Harley-Davidson Dyna Street Bob?

First of all, intervening on the electric battery of its Harley-Davidson Dyna Street Bob is generally regarded as a simple and easy maintenance. However, you will need to stick to a method to be able to not getting an electrical shock or even damage the circuits of your Harley-Davidson Dyna Street Bob. To begin with, it is good to remember the battery terminals and their action. The positive battery terminal, spotted by the red wire on the common motorcycle electric battery, is the terminal that transmits electrical current into the electrical circuits of your Harley-Davidson Dyna Street Bob. Conversely, the – battery terminal is regarded as the earth, that is connected on the frame of the motorcycle and permits to close the circuit. That is why, once working on this part, you need to take in account the features of the motorcycle electric battery terminals to prevent any problem.connect-battery-Harley-Davidson-Dyna-Street-Bob

The best ways to disconnect the electric battery from its Harley-Davidson Dyna Street Bob?

To start with, once unpluging the electric battery from your Harley-Davidson Dyna Street Bob, constantly take out the – battery terminal initially. To achieve this, simply use a screwdriver and unscrew the screws on the electric battery. This clamp is usually recognized by the black wire (or blue sometimes). Starting from the – side assists to protect the circuits. After that, simply unscrew the positive side, still with the screwdriver. The positive battery terminal is constantly observable by its reddish colored wire. Be careful that there is no point of contact among the 2 clamps, with the tools or yourself. On the other hand it is the electric shock assured with a terrible pain !!!

Tips on how to reconnect the battery of its Harley-Davidson Dyna Street Bob?

For this operation, it is very simple, you need to reconnect the positive clamp of the electric battery (symbolized by a +) to the red motorcycle Wire. Make sure that your Harley-Davidson Dyna Street Bob electric battery is recharged, otherwise go to our article on how to charge a motorbike battery. Then reconnect the – clamp of your electric battery with the black wire. Always use a screwdriver. Ensure that the electric battery lugs are clean, ie with no corrosion, because it can slow down the electric intensity. In general, a small metallic brush enables to get rid of it. Be careful to not touch the 2 electric battery clamps during your manipulation, otherwise it will be painful !