How to connect and disconnect the battery on its Harley Davidson DYNA STREET BOB?
First, intervening on the electric battery of its Harley Davidson DYNA STREET BOB is often considered a simple and easy maintenance. Nevertheless, you will need to follow a methodology to be able to not getting an electrical shock or possibly damage the electrical circuits of your Harley Davidson DYNA STREET BOB. In the first place, it is important to remember the terminals and their action. The + terminal, spotted by the reddish wire on the common motorbike electric battery, is the side that sends the electricity into the electrical circuits of your Harley Davidson DYNA STREET BOB. On the other hand, the negative terminal is considered as the ground, that is pluged on the motorbike frame and enables to close the electronical circuit. This is why, once working on this part, you must take in concern the features of the motorbike electric battery terminals to avoid any trouble.
Tips on how to disconnect the electric battery from its Harley Davidson DYNA STREET BOB?
Firstly, once disconnecting the electric battery from your Harley Davidson DYNA STREET BOB, constantly take out the negative terminal initially. To get this done, basically use a screwdriver and unscrew the screws on the electric battery. This terminal is usually identified by the dark wire (or blue in some cases). Beginning from the negative clamp assists to preserve the circuits. Next, simply unscrew the + clamp, still with the screwdriver. The + side is constantly observable by its reddish colored wire. Be careful that you cannot find any point of contact between the 2 clamps, with the tools or your hands. Otherwise it is the electrocution guaranteed with a free new hairstyle !!!
How to reconnect the battery of its Harley Davidson DYNA STREET BOB?
For this operation, it is quite basic, you should reconnect the + terminal of the electric battery (symbolized by a +) to the reddish wire. Be sure that your Harley Davidson DYNA STREET BOB electric battery is recharged, otherwise check out at our document on how to charge a motorbike battery. After that reconnect the negative clamp of your electric battery with the dark wire. Always use a screwdriver. Ensure that the electric battery lugs are clean, for instance without corrosion, because it can slow down the electrical intensity. Generally, a small metallic brush will allow to remove any impurities. Be careful to not contact the 2 electric battery clamps during your intervention, otherwise it will sting !