How to connect and disconnect the battery on its Harley-Davidson Electra Glide?

First of all, working on the battery of its Harley-Davidson Electra Glide is often considered a simple task. However, you need to stick to a methodology to be able to not being electrocuted or even damage the circuits of your Harley-Davidson Electra Glide. To begin with, it is important to remember the battery terminals and their action. The + terminal, spotted by the red wire on the common motorcycle battery, is the terminal that transmits electrical current into the electrical circuits of your Harley-Davidson Electra Glide. Conversely, the negative terminal is regarded as the ground, that is pluged on the motorbike frame and allows to close the circuit. That is why, when working on this part, you need to take in concern the functions of the motorcycle battery terminals to prevent any problem.connect-battery-Harley-Davidson-Electra-Glide

How to disconnect the battery from its Harley-Davidson Electra Glide?

To start with, when disconnecting the battery from your Harley-Davidson Electra Glide, constantly take out the negative terminal first. To achieve this, just use a screwdriver and unscrew the screws on the battery. This terminal can be recognized by the dark-colored wire (or blue in some cases). Starting from the negative side helps to protect the motorbike electrical circuits. After that, simply unscrew the + side, still with the screwdriver. The + battery terminal is constantly observable by its reddish colored wire. Be careful that you cannot find any contacts between the 2 terminals, with the tool or your hands. On the other hand it is the electrocution assured with a free new hairstyle !!!

How to connect the battery of its Harley-Davidson Electra Glide?

For this operation, it is quite simple, you need to connect the + terminal of the battery (represented by a +) to the red motorbike Wire. Make sure that your Harley-Davidson Electra Glide battery is charged, otherwise check out at our article on how to charge a motorbike battery. After that connect the negative terminal of your battery with the dark-colored wire. Use a screwdriver. Be sure that the battery lugs are neat, for instance without corrosion, because it can impede the electric current flow. In general, a simple metallic brush will permit to get rid of it. Be careful to not contact the 2 battery terminals during your manipulation, otherwise it will sting !