How to connect and disconnect the battery on its Honda VFR 800?

Initially, intervening on the battery of its Honda VFR 800 is typically regarded as a basic maintenance. However, you will need to follow a method to be able to not getting an electrical shock or even damage the circuits of your Honda VFR 800. To start with, it is important to recall the battery terminals and their function. The + terminal, identified by the reddish wire on most of motorcycle battery, is the side that transmits electrical current into the electrical circuits of your Honda VFR 800. Alternatively, the negative terminal is considered as the ground, that is pluged on the frame of the motorcycle and enables to close the electronical circuit. For this reason, once working on this part, you need to take in concern the functions of the motorcycle battery terminals to prevent any trouble.connect-battery-Honda-VFR-800

How to disconnect the battery from its Honda VFR 800?

First of all, once unpluging the battery from your Honda VFR 800, constantly remove the negative terminal initially. To get this done, basically use a screwdriver and unscrew the lugs on the battery. This clamp is usually recognized by the dark-colored wire (or blue sometimes). Starting with the negative terminal helps to protect the motorbike electrical circuits. After that, basically unscrew the + terminal, still with the screwdriver. The + side is constantly visible by its reddish colored wire. Be cautious that there is absolutely no point of contact among the two clamps, with the tools or yourself. On the other hand it is the accidental electrocution assured with a free new hairstyle !!!

The right way to reconnect the battery of its Honda VFR 800?

Relating to this task, it is quite basic, you have to reconnect the + clamp of the battery (represented by a +) to the reddish wire. Be certain that your Honda VFR 800 battery is charged, otherwise check out at our article on how to charge a motorbike battery. After that reconnect the negative terminal of your battery with the dark-colored wire. Always use a screwdriver. Ensure that the battery lugs are clean, for example with no corrosion, because it can impede the electric flow. Generally, a simple metallic brush allows to get rid of it. Be cautious to not touch the two battery clamps during your manipulation, otherwise it will be harmful !