How to connect and disconnect the battery on its Piaggio X10 350?

First, working on the electric battery of its Piaggio X10 350 is generally considered a basic task. Nevertheless, you have to follow a methodology to be able to not getting an electrical shock or possibly damage the circuits of your Piaggio X10 350. To start with, it is good to remember the terminals and their function. The positive terminal, identified by the reddish wire on the common motorcycle electric battery, is the terminal that transmits the electricity into the circuits of your Piaggio X10 350. Alternatively, the – terminal is considered as the earth, that is pluged on the frame of the motorcycle and enables to close the electronical circuit. That is why, once intervening, you need to take in concern the features of the motorcycle electric battery terminals to avoid any trouble.connect-battery-Piaggio-X10 350

How to disconnect the electric battery from its Piaggio X10 350?

To start with, once unpluging the electric battery from your Piaggio X10 350, constantly remove the – terminal initially. To achieve this, basically use a electric screwdriver and unscrew the lugs on the electric battery. This terminal is usually identified by the black wire (or blue in some cases). Starting from the – clamp helps to protect the circuits. Next, basically unscrew the positive clamp, always with the cruciform screwdriver. The positive side is constantly visible by its red wire. Be aware that there is no point of contact between the 2 clamps, with the tool or yourself. On the other hand it is the electrocution guaranteed with a terrible pain !!!

How to connect the battery of its Piaggio X10 350?

Relating to this task, it is quite simple, you need to connect the positive terminal of the electric battery (symbolized by a +) to the reddish wire. Be sure that your Piaggio X10 350 electric battery is charged, otherwise check out at our document on how to charge a motorbike battery. After that connect the – terminal of your electric battery with the black wire. Use a screwdriver. Be sure that the electric battery lugs are clean, for instance without corrosion and rust, because it can impede the electrical flow. In general, a small metallic brush enables to get rid of it. Be aware to not contact the 2 electric battery clamps during your intervention, otherwise it will sting !