How to connect and disconnect the battery on its Piaggo X Evo 125 ?

Initially, working on the electric battery of its Piaggo X Evo 125  is often considered a simple task. Nevertheless, you need to follow a method to be able to not getting an electrical shock or even damage the circuits of your Piaggo X Evo 125 . To begin with, it is significant to remember the terminals and their function. The positive terminal, spotted by the reddish colored wire on most of motorbike electric battery, is the terminal that transmits electrical current into the electrical circuits of your Piaggo X Evo 125 . Alternatively, the negative terminal is regarded as the ground, that is connected on the frame of the motorcycle and permits to close the circuit. That is why, once working on this part, you should take in account the features of the motorbike electric battery terminals to avoid any inconvenience.connect-battery-Piaggo-X-Evo-125 

Tips on how to disconnect the electric battery from its Piaggo X Evo 125 ?

To begin with, once disconnecting the electric battery from your Piaggo X Evo 125 , always remove the negative terminal initially. To achieve this, basically use a electric screwdriver and unscrew the screws on the electric battery. This clamp is usually identified by the dark-colored wire (or blue in some cases). Beginning from the negative clamp helps to preserve the motorbike electrical circuits. After that, simply unscrew the positive clamp, still with the cruciform screwdriver. The positive side is always observable by its red wire. Be mindful that there is no contacts among the two clamps, with the tool or yourself. Otherwise it is the accidental electrocution guaranteed with a free new hairstyle !!!

How to connect the battery of its Piaggo X Evo 125 ?

According to this task, it is quite basic, you should connect the positive clamp of the electric battery (represented by a +) to the reddish colored wire. Make sure that your Piaggo X Evo 125  electric battery is recharged, otherwise go to our document on how to charge a motorbike battery. Then connect the negative terminal of your electric battery with the dark-colored wire. Use a screwdriver. Make sure that the electric battery lugs are neat, ie without corrosion, because it can impede the electric intensity. In general, a simple metallic brush enables to remove any impurities. Be mindful to not touch the two electric battery clamps during your task, otherwise it will certainly sting !